Windmill Supplies

Save Your Time......Buy On Line

 

 Purchase Comet Windmill Parts Online

 
  C-pattern 8ft, 10ft, 12ft,14ft       
                                                           
 

 

You can purchase youre Comet Windmill Parts in the Online Shop 

     
 
 
MAJOR Overhaul Kit 8—14ft — Driveshaft, Connecting Rod, Crosshead (incl. pin/dowel), Swivel, with nylon bearings. 
 
 
MINOR Overhaul Kit 8 - 14ft — Connecting Rod, Crosshead (incl. pin/dowel), Swivel, with nylon bearings.
 
 
 
 
1        Main Casting Complete Incl. 2, 50, 95, 137, 139, 140, 191                   
  2        Oil Lid for Main Casting                                                                                 
  3        Hub Complete Incl. 125 
  5        Crank Pin Washer 
  6        Connecting Rod Complete Incl. 7, 78, 157, 192 
  7        Oil Lid for Connecting Rod 
  8        Crosshead Incl. 120 
  9        Swivel Incl. 120 
  10      Bottom Guide Complete Incl. 10A 
  10      A Grease Cup for Bottom Guide 
  11      Roller Guide Complete Incl. 12, 128 
  12      Rollers for Roller Guide 
  13      Inner Pullout Collar 
  14      Outer Pullout Collar Complete Incl. 116 
  15      Top of Turntable Complete Incl. 15A 
  15A   Oil Lid for Turntable       
  16      Tower Cap 
  17      Top Vane Hinge Casting 
  18      Bottom Vane Hinge Casting Complete Incl. 19, 85 
  19      Buffer Studs 
  20      Pullout Bracket Complete Incl. 21, 122 
  21      Chain Rollers 
  22     Tension Casting 
  23     Balance Weights Complete Incl. 126 
  32     Wheel Arms – Complete Set 
  33     Wheel Arm – One only 
  39     Outer Rims – Complete Set 
  40     Outer Rim – One only 
  41     Inner Rims – Complete Set 
  42     Inner Rim – One only 
  43     Fishplates for joining Mill Rods 
  44     Connecting Straps for Guide Bar 
  49     Pullout Lever Complete Incl. 59  
  50     Stop Bracket on Mast Pipe 
  52     Equalizing Bar 
  55     Chain Plate 
  57     ‘S’ Hooks for Pullout Chain 
  59     Stop Pin for Pullout Lever 
  60     ‘U’ Clip for Vane Hinge Rod with Nuts and Washers 
  61     Tension Bolt with Nuts 
  62    ‘U’ Clip for Pullout Lever with Nuts and Washers 
  63     Vane Hinge Rod Incl. 197 
  66     Pullout Guide Rod with Nut and Lock Washer 
  69     Vane Frame – Complete Incl. 17, 18, 70, 71, 72, 73 
  70     Top Vane Angle 
  71     Stiffening Vane Angle 
  72     Upright Vane Angle 
  73     Bottom Vane Angle 
  78     Crosshead Pin Complete Incl. 
  80     Driving Shaft Complete with Crank, Crank Pin, 5, 138, 159 
  84     Governor Spring 
  85     Buffer Spring
  86     Latch Spring Complete with Latch 
  88     Vane Sheet Complete with Galv. Straps 
  89     Sails – Complete Set 
  90     Sail – One only 
 
  
 
  91     Outer Sail Brackets – Complete Set
  92     Outer Sail Bracket – One only
  93     Inner Sail Brackets – Complete Set
  94     Inner Sail Bracket – One only
  95     Galvanised Oil Box for Main Casting
  101   Ring Oiler Tube
  105   Galv. Bolts – Sail Brackets to Rims
  106   Galv. Bolts – Sail Brackets to Sails
  107   Bolts – Lap of Outer Rims
  108   Bolts – Inner Rims to Arms at Lap
  109   Bolts – Outer Rims to Arms
   110   Bolts – Arms to Hub
  111   Bolts – Inner Rims to Arms
  112   Bolts – Vane Sheet to Vane Angles
  113   Bolt – Upright Vane Angle
  114   Bolt – Outer End of Vane Angles
  115   Bolts – Bottom Guide to Tower
  116   Bolts – Outer Pullout Collar
  117   Bolts – Tower Cap to Tower
  119   Bolts – Pullout Bracket to Main Casting
  120   Bolts – Swivel to Guide Bar
  121   Bolts – Top Vane Hinge Casting to Angle
  122   Bolt – Chain Roller on Pullout Bracket
  124   Stay Bolt for Pullout Bracket
  125   Clamp Bolts for Hub
  126   Bolts – Balance Weights
  127   Bolts – Connecting Straps to Mill Rod
  128   Bolts – Rollers on Rollerguide
  129   Bolt – Chain Roller on Main Casting
  137   Set Screws for 50
  138   Set Screws for 5 
 139   Set Screw with Leather Washer – for Oil   Well 
  140   Set Screw for Drive Shaft Bearing    Bushes
  142   Set Screw for 86
  157   Through Pin for Crosshead Pin
  159   Through Pin for Drive Shaft
  182   Steel Balls for Turntable
  183   Double Pullout Chain Complete Incl. 52
  185   Pullout Chain for Vane Complete Incl. 57
  186   Check Chain
  187   Galv. Pullout Wire
  190   Mill Rods
  191   Drive Shaft Bearing Bushes (set)
  192   Connecting Rod Bearing Bushes
  196   Syphon Wicks for Oil Wells
  197   Oil Cup for 63
  200   Dust Cover Complete Incl. 201, 202, 203.
  201   Oil Box in Dust Cover
  202   Fastening Bolt for Dust Cover
  203   Wing Nut for 202

 


 


Copyright © . All Rights Reserved Windmill Supplies.

Site developed by Deft Development